Plastic Injection Molding Services in Irvine
Protoshop Inc. molds custom plastic parts for Irvine engineering teams from its shop in Carlsbad, about an hour south on the 5. Whether you are validating a diagnostic housing near the Irvine Spectrum, iterating a wearable enclosure in the Irvine Business Complex, or building a sensor mount for a mobility program, you get rapid prototype tooling, production-grade plastic parts, and a plastics engineer who walks through your part model with you before any metal is cut.
Request a Free Quote Call Our TeamRequest a Quote
5-10 Days Prototype Lead Time
50+ Resin Options
+/-0.005″ Tolerances
1-10K Part Quantities
Why Irvine Engineering Teams Bring Their Parts to Protoshop
Irvine product development moves in fixed steps. Medical device and diagnostics teams around the Irvine Spectrum work toward verification builds and design freezes. Consumer hardware groups iterate enclosures against launch dates that were set long before tooling began. Research teams and early-stage companies connected to UC Irvine need small quantities of parts that behave like the final product.
These programs share one exposure. A geometry problem found after the tool is cut costs more than the tool. Protoshop organizes its process around finding that problem first: a complimentary moldability review with a plastics engineer, a prototype mold in about a week, and corrections that typically take about a day. The shop does not turn down a job because the part is difficult.
Protoshop’s Capabilities at a Glance

- Prototype molds are typically completed in about one week, and your quote states the lead time for your specific part.
- Mold iterations typically turn around in about one day, so a geometry change costs days rather than weeks.
- A complimentary moldability review runs as a live online meeting with a plastics engineer, not as an automated software report.
- No part geometry restrictions. Complex geometry, unusual materials, insert molding, and overmolding are specialties rather than exceptions.
- Every mold is sampled at 25 parts and reviewed with you before you commit to further quantities.
- A single prototype mold can produce several thousand parts per week.
- Mold inserts can transfer to the contract manufacturer of your choice when you scale to volume production, depending on how many parts were run on the mold.
- Tolerances are typically under 0.004″ (0.1 mm), with 0.001″ (0.025 mm) achievable on certain materials and part geometries.
- Parts up to 8″ x 6″ x 4″ (200 x 150 x 100 mm), with a shot volume up to 6 oz (170 g).
- Materials including ABS, PC, PP, COC, Nylon and TPE, with the capability to run high-temperature materials like PEEK and Ultem. Specialty materials such as PEEK are not stocked but can be customer-supplied or sourced separately upon request.
- A project portal tracks every job. Requested changes trigger email notifications, shipments arrive with FedEx tracking, inspection reports are available, and the full project history, including quotes, packing slips, and mold iterations, stays available for download.
Plastic Injection Molding Solutions Across the Greater LA Area
Prototype Molds in About a Week
A prototype mold is the step between a CAD file and a part you can test. Protoshop CNC-machines mold cavities in soft metal and molds your part in a production thermoplastic, so the parts that reach your Irvine facility behave the way production parts will. A printed part shows whether something fits. A molded part shows whether it works.
Soft-metal cavities make changes fast. If first shots show a wall that needs thickening or a boss that needs to move, the mold is typically modified and re-sampled in about a day.
Typical work for Irvine teams includes diagnostic device housings for verification builds, wearable enclosures ahead of a launch review, and sensor mounts for mobility programs.
Production Quantities From a Single Mold
Once a part is approved, a single prototype mold can produce several thousand parts per week. That covers verification builds, pilot lots, field evaluation units, and early commercial quantities without a second tooling investment.
When volumes outgrow the prototype mold, mold inserts can transfer to the contract manufacturer you choose, depending on how many parts were run on the mold. For Irvine teams planning a contract manufacturing handoff, that is worth confirming at the start.
Inserts and Overmolded Features
Insert molding places a component, usually a threaded brass insert, into the mold before plastic is injected around it, which removes a downstream assembly step. Overmolding shoots a second material, typically a soft TPE, over a rigid substrate for grips, seals, and soft-touch surfaces.
Both processes are common in medical, electronics, and handheld products, and both are jobs other prototype molders often decline. Protoshop treats complex prototyping as its specialty.
The Live Moldability Review
Every customer receives a complimentary moldability review, held as a live online meeting. A plastics engineer walks through your part model and points out the features most likely to cause defects: wall thickness transitions, insufficient draft, gate placement, undercuts, knit lines, and geometry that traps gas or pulls sink.
A meeting works better than a report because the reasoning matters as much as the finding. Software can flag a thin wall. It cannot tell you which of the available fixes suits your resin, your tolerance, and the way the part assembles. Reviews may also be shared as a recorded CAD walkthrough that your team can replay and forward.
Medical Product Development Experience
Protoshop’s founders bring over 25 years of medical product development experience, specifically in consumable plastic products. The team can mold cyclic olefin copolymer (COC) and cyclic olefin polymer (COP), materials used in medical applications that not every shop can accommodate. Inspection reports accompany shipments, and the project portal keeps quotes, packing slips, inspection reports, and mold iterations accessible. Customers can also supply qualified materials or request sourcing to their specifications. Protoshop maintains a quality management system (QMS) aligned with ISO 13485 but is not formally certified to the standard.
Design Support for Irvine Teams Before Tooling Begins
Many Irvine projects start as a design that has never met a mold. A hardware team may have a printed prototype that works well on the bench. A medical device group may have a housing designed around assembly rather than molding. Another supplier may have flagged undercuts and thin walls without explaining the fix.
Protoshop does not refuse jobs with difficult part requirements. If it can be molded, Protoshop will mold it. Getting there sometimes means working on the design first, and that work happens before you commit to anything.
Part Geometry Review
Your model is evaluated through the lens of injection molding: draft angles, wall thickness and transitions, undercuts, gate placement, and parting lines. A plastics engineer walks you through each recommended change in a live session and explains the reasoning, so your team understands what is adjusted and why.
Preparing Files for the Mold
Many Irvine clients arrive with files built for 3D printing, CNC machining, or industrial design visualization. Zero-draft walls, uniform thin sections and features optimized for additive processes can create problems in a mold. Protoshop can review existing files and identify changes needed to make a part mold-ready. When requested, the team can also modify existing files with customer approval.
Choosing a Resin
With thousands of thermoplastic grades available, resin choice is easy to get wrong. Protoshop’s engineers match material properties to the application: impact resistance, temperature range, chemical compatibility, and surface finish. Materials can be pulled from stock, purchased to your specification, or supplied by you when your program requires a particular qualified lot.
Planning Cavities and the Production Path
Before a tool is cut, a few decisions shape the rest of the program: how many cavities to build, whether to simplify the part now or after first shots, and whether to prove out geometry in a prototype mold before committing to production tooling elsewhere. Protoshop maps those tradeoffs against your development stage, your budget, and where you plan to produce at volume.
Who Benefits Most:
- Medical device teams preparing verification builds
- Consumer hardware teams moving from 3D printing to injection molding for the first time
- Automotive and mobility engineers converting machined components into molded parts
- Researchers and startups building a first small-quantity run
- Product managers who inherited a design and want an independent review before tooling
- Engineers whose part geometry another prototype molder has already rejected
Not sure your design is ready? Send us your files. No charge, no commitment.
Where Protoshop’s Work Lands in Irvine
Medical Device and Diagnostics Products
The Irvine Spectrum and the Irvine Business Complex hold a deep concentration of medical device and diagnostics companies. Protoshop’s founders spent more than 25 years in medical product development, specifically consumable plastic products. That experience applies to housings and single-use components that must mold consistently from the first shot to the last.
Consumer Electronics and Wearables
Hardware teams developing wearables, peripherals, and connected devices in Irvine design to cosmetic standards that match retail products. Protoshop aims to replicate production part quality in the prototype mold rather than approximate it, and a finish or fit change turns around in about a day.
Automotive and Mobility Components
Automotive and mobility engineering teams work in and around Irvine on interior components, connectors, sensor housings, and electronics enclosures. Protoshop supports small-part programs with prototype tooling that keeps pace with design changes, and with the capability to mold high-temperature resins like PEEK and Ultem for applications with demanding thermal requirements.
Life Sciences and Lab Instrumentation
Research activity around UC Irvine and the surrounding biotech community creates demand for instrument housings, sample handling parts, and test fixtures in small quantities. These programs need tight tolerances and predictable material behavior. Protoshop typically holds tolerances under 0.004″ and can mold COC and COP, materials used in medical applications.
Startups and Hardware Incubators
Early-stage Irvine companies tend to need three things at once: someone who will work with an imperfect file, real engineering guidance rather than a quoting engine, and a path from a 25-part sample run to several thousand parts per week without re-tooling. Because mold inserts can transfer, an early tooling decision does not lock in where you produce later.
The Path From Uploaded Model to Molded Parts
1

Step 1: Submit Your Model
Upload your 3D part model through the Protoshop portal, which is available around the clock. Telling us your material preference, quantity, surface finish requirements, and inspection needs up front means fewer rounds before you have an accurate quote.
2

Step 2: Meet With a Plastics Engineer
A plastics engineer reviews your part model and walks you through potential molding issues before any metal is cut. Reviews may be shared through a recorded CAD walkthrough, allowing you to see the design from every angle, hear recommendations, and share the video with your team. Your quote includes the specific lead time for your part, and the moldability review is complimentary.
3

Step 3: Mold Machining
Once you accept the quote, mold fabrication begins. Cavities are CNC-machined in aluminum, which allows the mold to be built quickly and modified quickly afterward. Status changes are pushed to you by email throughout, so there is no silent gap between purchase order and first shot.
4

Step 4: Review 25 Sample Parts
When the mold is complete, Protoshop samples 25 parts and sends them to you for review. You evaluate real molded parts in your intended material before committing to further quantities. If something needs to change, that is a normal outcome at this stage rather than a setback.
5

Step 5: Order Your Parts or Request Iterations
From there, order parts as needed. Geometry changes are requested the same way and typically turn around in about a day. Shipments include FedEx tracking, inspection reports are available, and your tooling stays on file. Same day delivery is available for Irvine clients from the Carlsbad shop, about an hour south.
What Product Teams Say About Working With Protoshop
25+ Years of Experience
Over 10,000 Prototype Tools Delivered
5 Star Google ratings
Questions About Molding Prototype Plastic Parts
A plastics engineer meets with you online and walks through your part model on screen. The engineer points out wall thickness transitions, draft, gate placement, undercuts, and knit lines, then explains the options for each. The review is complimentary and happens before any tooling commitment. It can also be shared as a recorded CAD walkthrough, so colleagues who missed the meeting can watch it later.
Protoshop samples 25 parts from the finished mold and ships them to you for review. You evaluate real molded parts in your intended material before committing to a larger quantity. If the parts show something that needs to change, the mold is typically modified in about a day. Inspection reports are available with shipments when requested.
Yes. When volumes outgrow a prototype mold, mold inserts can be transferred to the contract manufacturer you choose, depending on how many parts were run on the mold. A single prototype mold can produce several thousand parts per week, which covers pilot builds before any transfer is needed. Raise your production plan early so the tooling decisions support it.
Yes. Customers can supply qualified material when a program requires a particular lot, or request sourcing to their specifications. Protoshop also works with ABS, PC, PP, COC, Nylon, and TPE from stock. High-temperature materials such as PEEK and Ultem can be run, but specialty materials such as PEEK are not stocked and are customer-supplied or sourced separately on request.
Yes. Insert molding places a component such as a threaded brass insert into the mold before plastic is injected around it. Overmolding applies a second material, typically a soft TPE, over a rigid substrate. Both are routine work at Protoshop, and complex prototyping is the shop’s specialty rather than something it declines. Mention the insert or second material when you submit the model so the moldability review covers it.
Yes. Protoshop accommodates requests to be onsite for part evaluation and mold changes, including visits where a customer brings its own customer to review parts. Irvine teams working against a tight build date can use this to evaluate parts as changes are made. The shop is in Carlsbad, about an hour south of Irvine on the 5.
Parts ship from Carlsbad by FedEx, and same day delivery is available for Irvine clients. Every shipment includes FedEx tracking, and inspection reports are available on request. The project portal also keeps quotes, packing slips, and mold iterations available for download, and requested changes trigger email notifications.
Protoshop Inc. Serving Irvine From Carlsbad
The shop is in Carlsbad, about an hour south on the 5, and same day delivery is available. Protoshop also works with teams across the rest of Orange County, San Diego County, and Los Angeles, and ships nationwide.
Protoshop Inc.
2270 Camino Vida Roble, Ste O, Carlsbad, CA 92011
(888) 416-3334
Mon through Fri: 7:00 AM to 6:00 PM PST
Call or email for expedited scheduling.
Same-day local pickup available
Let Us Build Your Next Irvine Product
Protoshop Inc. molds custom plastic parts for engineering teams in Irvine, including the Irvine Spectrum, the Irvine Business Complex, and the Great Park area, and for neighboring companies in Tustin, Costa Mesa, Newport Beach, Lake Forest, and Laguna Hills.
Upload your CAD files for a free quote and DFM review. 

Protoshop’s engineering team responds within 24 hours.

